<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>EETOP 创芯网论坛 (原名：电子顶级开发网) - 脚本资料区</title>
    <link>https://bbs.eetop.wang/forum-210-1.html</link>
    <description>Latest 20 threads of 脚本资料区</description>
    <copyright>Copyright(C) EETOP 创芯网论坛 (原名：电子顶级开发网)</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Mon, 08 Jun 2026 21:40:09 +0000</lastBuildDate>
    <ttl>180</ttl>
    <image>
      <url>https://bbs.eetop.wang/static/image/common/logo_88_31.gif</url>
      <title>EETOP 创芯网论坛 (原名：电子顶级开发网)</title>
      <link>https://bbs.eetop.wang/</link>
    </image>
    <item>
      <title>选中器件自动挨边对齐的SKII脚本</title>
      <link>https://bbs.eetop.wang/thread-994177-1-1.html</link>
      <description><![CDATA[以下是选中器件自动挨边对齐的SKII脚本，在layout中选中器件，然后load脚本进去CIW，执行函数即可。]]></description>
      <category>脚本资料区</category>
      <author>942627356</author>
      <pubDate>Mon, 25 Aug 2025 16:30:42 +0000</pubDate>
    </item>
    <item>
      <title>稀有perl资料高级perl编程英文第二版原版</title>
      <link>https://bbs.eetop.wang/thread-994113-1-1.html</link>
      <description><![CDATA[找了很久终于找到了，分享]]></description>
      <category>脚本资料区</category>
      <author>seabeam</author>
      <pubDate>Sun, 24 Aug 2025 07:10:10 +0000</pubDate>
    </item>
    <item>
      <title>[求助] 如何用skill实现mark net後, 蓋上DMY EXCL Layer</title>
      <link>https://bbs.eetop.wang/thread-993632-1-1.html</link>
      <description><![CDATA[如題, 
對SKILL不熟, 請求群內大神幫忙,


求一支SKILL, 
能夠用類似 leHiMarkNet()函數後, 長出DMY EXCL LAYER的SKILL,

長出DMY EXCL能調整寬度,
希望能夠大神多多幫忙, 感激不敬~~]]></description>
      <category>脚本资料区</category>
      <author>Avicii</author>
      <pubDate>Wed, 13 Aug 2025 15:13:52 +0000</pubDate>
    </item>
    <item>
      <title>Perl脚本处理.ccksoa的脚本，转成表格</title>
      <link>https://bbs.eetop.wang/thread-992254-1-1.html</link>
      <description><![CDATA[该Perl脚本可将已经生成的.ccksoa报告转成表格。具体过程为：把shortccksoarpt_v2.pl放在.ccksoa报告所在文件夹，perl执行，会生成一个后缀为shortccksoa.csv的表格，接下来可用诸如soffice等软件正常打开处理，大大提高人读效率。
 ...]]></description>
      <category>脚本资料区</category>
      <author>nebulawolf</author>
      <pubDate>Tue, 15 Jul 2025 06:57:46 +0000</pubDate>
    </item>
    <item>
      <title>脚本求助</title>
      <link>https://bbs.eetop.wang/thread-992211-1-1.html</link>
      <description><![CDATA[想用python写一个脚本，删除代码中出现module ... same_module（  一直到endmodule的模块，一直没成功，有大佬可以指点一下吗]]></description>
      <category>脚本资料区</category>
      <author>白龙吟</author>
      <pubDate>Mon, 14 Jul 2025 08:27:43 +0000</pubDate>
    </item>
    <item>
      <title>请问这个脚本有什么错误，一直用不了，求指导</title>
      <link>https://bbs.eetop.wang/thread-991507-1-1.html</link>
      <description><![CDATA[报错看不懂，有大佬帮忙看一下吗，谢谢]]></description>
      <category>脚本资料区</category>
      <author>bailin001</author>
      <pubDate>Sat, 28 Jun 2025 03:13:48 +0000</pubDate>
    </item>
    <item>
      <title>史上无敌最强LINUX命令学习大全</title>
      <link>https://bbs.eetop.wang/thread-990740-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>脚本资料区</category>
      <author>naninina</author>
      <pubDate>Fri, 13 Jun 2025 05:56:42 +0000</pubDate>
    </item>
    <item>
      <title>算法概论（Algorithms）中文版 以及英文版，对比算法导论等大部头，更容易先了解入门</title>
      <link>https://bbs.eetop.wang/thread-990468-1-1.html</link>
      <description><![CDATA[算法概论（Algorithms）中文版 以及英文版，对比算法导论等大部头，更容易先了解入门

notes: 删除文件名最后的  “.zip” 解压即可]]></description>
      <category>脚本资料区</category>
      <author>zhwei199</author>
      <pubDate>Sat, 07 Jun 2025 08:41:04 +0000</pubDate>
    </item>
    <item>
      <title>国产Tcl+Python混合脚本解释器tclpysh User Guide</title>
      <link>https://bbs.eetop.wang/thread-989831-1-1.html</link>
      <description><![CDATA[国产 Tcl + Python 混合脚本解释器 tclpysh，可在两种语言间随时切换，支持变量原生共享，支持在第三方工具的 Python 命令行中通过 import 导入。]]></description>
      <category>脚本资料区</category>
      <author>Challensys</author>
      <pubDate>Fri, 23 May 2025 08:56:16 +0000</pubDate>
    </item>
    <item>
      <title>后仿真自动化脚本求助</title>
      <link>https://bbs.eetop.wang/thread-989426-1-1.html</link>
      <description><![CDATA[由于做了很多cell， 每次手动为每一个cell 做DRC LVS PEX 以及后仿真感觉很重复并且消耗时间，请问有没有相关的脚本可以批量自动化进行每个cell的后仿真工作呢？应该用什么脚本语言呢？Python是否可以实现？有没有相关的第三方库呢？
 ...]]></description>
      <category>脚本资料区</category>
      <author>ZhangLujiu</author>
      <pubDate>Fri, 16 May 2025 03:10:59 +0000</pubDate>
    </item>
    <item>
      <title>Linkers and Loaders</title>
      <link>https://bbs.eetop.wang/thread-988741-1-1.html</link>
      <description><![CDATA[Linkers and Loaders


Backend of compiler]]></description>
      <category>脚本资料区</category>
      <author>zhb9103</author>
      <pubDate>Sun, 04 May 2025 23:24:09 +0000</pubDate>
    </item>
    <item>
      <title>半导体经典书籍300+本分享</title>
      <link>https://bbs.eetop.wang/thread-988088-1-1.html</link>
      <description><![CDATA[半导体经典书籍300+本

下图随机展示几本
回复可查看路径！

[hide=d1000000]半导体经典书籍300+本
https://bbs.eetop.cn/thread-987960-1-1.html
(出处: EETOP 创芯网论坛 (原名：电子顶级开发网))
[/hide]
 ...]]></description>
      <category>脚本资料区</category>
      <author>AZP</author>
      <pubDate>Mon, 21 Apr 2025 06:12:17 +0000</pubDate>
    </item>
    <item>
      <title>layout 多边形转换成矩形</title>
      <link>https://bbs.eetop.wang/thread-987303-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>脚本资料区</category>
      <author>yangwgtop</author>
      <pubDate>Mon, 07 Apr 2025 15:01:50 +0000</pubDate>
    </item>
    <item>
      <title>批量生成gds</title>
      <link>https://bbs.eetop.wang/thread-986911-1-1.html</link>
      <description><![CDATA[批量生成gds]]></description>
      <category>脚本资料区</category>
      <author>婷可爱的芯</author>
      <pubDate>Mon, 31 Mar 2025 10:08:03 +0000</pubDate>
    </item>
    <item>
      <title>工艺转换：金属层增加</title>
      <link>https://bbs.eetop.wang/thread-986491-1-1.html</link>
      <description><![CDATA[请问有大佬知晓工艺m3:A1,A2,MT转到m4:A1 A2 A3 MT，能用脚本快速实现吗？]]></description>
      <category>脚本资料区</category>
      <author>CHENEN</author>
      <pubDate>Mon, 24 Mar 2025 06:19:46 +0000</pubDate>
    </item>
    <item>
      <title>读取TXT文件的skill脚本</title>
      <link>https://bbs.eetop.wang/thread-986037-1-1.html</link>
      <description><![CDATA[小弟是初学者，希望从文本文件中，读取大量坐标和label数据，具体如下，然后用dbcreatelabel命令添加label。请问从文本文件中读取数据的skill脚本如何实现

label0 x0 y0 layer sublayer
label1 x1 y1 layer sublayer
。
。
。
。
 ...]]></description>
      <category>脚本资料区</category>
      <author>ganete</author>
      <pubDate>Fri, 14 Mar 2025 07:59:43 +0000</pubDate>
    </item>
    <item>
      <title>pathSeg/bus线，跳线，2个孔，不限工艺！</title>
      <link>https://bbs.eetop.wang/thread-985967-1-1.html</link>
      <description><![CDATA[用法：按下快捷键后，1.选线；2.在lsw选择目标金属层；3.框选区域]]></description>
      <category>脚本资料区</category>
      <author>Looney36</author>
      <pubDate>Thu, 13 Mar 2025 07:05:50 +0000</pubDate>
    </item>
    <item>
      <title>drc density密度跑出的图形根据坐标导入到cellview的skill</title>
      <link>https://bbs.eetop.wang/thread-985887-1-1.html</link>
      <description><![CDATA[如果输入数据 `input_data` 是一个文件 `aa`，我们需要修改脚本以从文件中读取数据，而不是直接使用硬编码的输入数据。以下是修改后的 Python 脚本：

---

### **修改后的 Python 脚本**

```python
# 从文件 aa 中读取输入数据
with open(\&quot;aa\&quot;, \&quot;r\&quot;) as file:
    inp ...]]></description>
      <category>脚本资料区</category>
      <author>smint1986</author>
      <pubDate>Wed, 12 Mar 2025 07:33:57 +0000</pubDate>
    </item>
    <item>
      <title>自动将pathseg线缩到via处</title>
      <link>https://bbs.eetop.wang/thread-985840-1-1.html</link>
      <description><![CDATA[已经存在via的情况下将pathseg线（path和rect可以自己加）的边界和孔的边界对齐；
适用情况1，pathseg经过孔并产生多余线头；
             2，pathseg线和孔交叠，但并没有产生多余线头（边界在孔内部）；
pathseg线和孔没有交叠的情况不适用；该脚本纯手搓，没有环境 ...]]></description>
      <category>脚本资料区</category>
      <author>小王同学num:one</author>
      <pubDate>Tue, 11 Mar 2025 08:25:36 +0000</pubDate>
    </item>
    <item>
      <title>求skill 一鍵增加MOS左右DUMMY POLY</title>
      <link>https://bbs.eetop.wang/thread-985517-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>脚本资料区</category>
      <author>jackychen168</author>
      <pubDate>Thu, 06 Mar 2025 08:55:57 +0000</pubDate>
    </item>
  </channel>
</rss>