<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>EETOP 创芯网论坛 (原名：电子顶级开发网) - Aultium/Protel PCB</title>
    <link>https://bbs.eetop.wang/forum-302-1.html</link>
    <description>Latest 20 threads of Aultium/Protel PCB</description>
    <copyright>Copyright(C) EETOP 创芯网论坛 (原名：电子顶级开发网)</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Sun, 07 Jun 2026 06:50:28 +0000</lastBuildDate>
    <ttl>180</ttl>
    <image>
      <url>https://bbs.eetop.wang/static/image/common/logo_88_31.gif</url>
      <title>EETOP 创芯网论坛 (原名：电子顶级开发网)</title>
      <link>https://bbs.eetop.wang/</link>
    </image>
    <item>
      <title>AD25软件</title>
      <link>https://bbs.eetop.wang/thread-994158-1-1.html</link>
      <description><![CDATA[AD25软件]]></description>
      <category>Aultium/Protel PCB</category>
      <author>liuyb</author>
      <pubDate>Mon, 25 Aug 2025 09:18:22 +0000</pubDate>
    </item>
    <item>
      <title>altium designer不能新建reuse block,如何解决？</title>
      <link>https://bbs.eetop.wang/thread-983408-1-1.html</link>
      <description><![CDATA[https://www.bilibili.com/video/BV13G411g7ge
第31秒





的  菜单项目 File » New » Reuse Block   找不到  怎么解决？




我的 菜单是：





菜单项目 File » New » Reuse Block  不存在


软件从AD官网下的ad24版








只能通过 PCB和SCH文档 选取部分 ...]]></description>
      <category>Aultium/Protel PCB</category>
      <author>zzsczz</author>
      <pubDate>Tue, 04 Feb 2025 16:28:29 +0000</pubDate>
    </item>
    <item>
      <title>PCB布线完成后，仍显示漏线</title>
      <link>https://bbs.eetop.wang/thread-975127-1-1.html</link>
      <description><![CDATA[如题，连完PCB后，打开report发现有一条线没连，点击panels-PCB，定位到”3.3V“这根线，然后就奇了怪了，明明所有的3.3V都连了，为什么会报这根线未连接呢？


我将所有的3.3V高亮显示，很明显所有的3.3都连在了一起，我仔细一一核对，还是没找到问题所在，甚至还把过 ...]]></description>
      <category>Aultium/Protel PCB</category>
      <author>时间在走人在变</author>
      <pubDate>Thu, 29 Aug 2024 05:47:25 +0000</pubDate>
    </item>
    <item>
      <title>AD原理图某些信号不连接可以吗</title>
      <link>https://bbs.eetop.wang/thread-974311-1-1.html</link>
      <description><![CDATA[最近在忙着测试一款数模混合成像芯片，我的方案是将芯片焊在PCB上，然后将PCB插在FPGA上。目前的问题是芯片的输入输出引脚数量太多，而市面上能买到的FPGA的引脚又比较少，所以考虑之后，选择将芯片的输入控制信号减少。


如下图所示，比如原来是RST共计4个，我在右边 ...]]></description>
      <category>Aultium/Protel PCB</category>
      <author>时间在走人在变</author>
      <pubDate>Wed, 14 Aug 2024 08:46:25 +0000</pubDate>
    </item>
    <item>
      <title>Altium_Designer_Public_24_4_1 (官方安装包下载链接</title>
      <link>https://bbs.eetop.wang/thread-969205-1-1.html</link>
      <description><![CDATA[Altium Designer AD 24 软件安装包下载  秒下


https://data.altium.com.cn/ui/core/index.html?mode=single&amp;path=/SHARED/%21YzWez6LG63vGbZZKptNmz9Ru5/SEhWSPnpIdh1YCOD#/]]></description>
      <category>Aultium/Protel PCB</category>
      <author>sym21ic</author>
      <pubDate>Mon, 13 May 2024 09:21:38 +0000</pubDate>
    </item>
    <item>
      <title>Altium Designer 19 PCB设计官方指南（EDA工程技术丛书）</title>
      <link>https://bbs.eetop.wang/thread-965955-1-1.html</link>
      <description><![CDATA[Altium Designer 19 PCB设计官方指南（EDA工程技术丛书）]]></description>
      <category>Aultium/Protel PCB</category>
      <author>邝卓宇</author>
      <pubDate>Thu, 21 Mar 2024 08:50:53 +0000</pubDate>
    </item>
    <item>
      <title>Aultium/Protel FPC补强板设计</title>
      <link>https://bbs.eetop.wang/thread-962930-1-1.html</link>
      <description><![CDATA[FPC柔性电路板具有轻薄、柔软的同时，也失去了刚性的性能，那么为了使产品指定部位增加一定的厚度和刚性，以便于客户的后续安装或装配，我们就需要在这些位置贴上一块刚性的板材，即补强板。
Aultium/Protel 没有专门的FPC补强层，需要通过以下方式来设计




 ...]]></description>
      <category>Aultium/Protel PCB</category>
      <author>孺子牛PCB</author>
      <pubDate>Fri, 19 Jan 2024 10:15:38 +0000</pubDate>
    </item>
    <item>
      <title>寻兼职硬件</title>
      <link>https://bbs.eetop.wang/thread-959879-1-1.html</link>
      <description><![CDATA[寻兼职硬件工程师，有意者留个联系v]]></description>
      <category>Aultium/Protel PCB</category>
      <author>春野雪</author>
      <pubDate>Thu, 23 Nov 2023 03:16:04 +0000</pubDate>
    </item>
    <item>
      <title>PCB上的偏置设计</title>
      <link>https://bbs.eetop.wang/thread-959182-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>Aultium/Protel PCB</category>
      <author>LCMOS</author>
      <pubDate>Fri, 10 Nov 2023 07:42:59 +0000</pubDate>
    </item>
    <item>
      <title>pcb回板后，是手工焊接还是找工厂焊接</title>
      <link>https://bbs.eetop.wang/thread-953410-1-1.html</link>
      <description><![CDATA[初学硬件，纯小白，请教各位大佬，pcb回板后，元器件是自己焊接的吗？比如ddr，那么多引脚，pin-pin之间间距又小，手工焊接，那水平得多高啊？求指导。]]></description>
      <category>Aultium/Protel PCB</category>
      <author>春野雪</author>
      <pubDate>Mon, 31 Jul 2023 09:00:46 +0000</pubDate>
    </item>
    <item>
      <title>请问大家遇到过这个问题吗，打开软件报错</title>
      <link>https://bbs.eetop.wang/thread-949517-1-1.html</link>
      <description><![CDATA[打开软件报错
PCB1.PcbDoc could not be found and is being removed from the project


尝试过重装，重启，都没法解决这个问题。
谢谢大家]]></description>
      <category>Aultium/Protel PCB</category>
      <author>Langrange</author>
      <pubDate>Sat, 20 May 2023 14:08:38 +0000</pubDate>
    </item>
    <item>
      <title>MATLAB智能算法30个案例分析 源代码</title>
      <link>https://bbs.eetop.wang/thread-947942-1-1.html</link>
      <description><![CDATA[MATLAB智能算法30个案例分析 源代码]]></description>
      <category>Aultium/Protel PCB</category>
      <author>落雪听禅</author>
      <pubDate>Sun, 23 Apr 2023 00:04:58 +0000</pubDate>
    </item>
    <item>
      <title>PCB设计270条</title>
      <link>https://bbs.eetop.wang/thread-947905-1-1.html</link>
      <description><![CDATA[PCB设计270条]]></description>
      <category>Aultium/Protel PCB</category>
      <author>落雪听禅</author>
      <pubDate>Sat, 22 Apr 2023 05:52:22 +0000</pubDate>
    </item>
    <item>
      <title>零起步轻松学数字电路(第2版)扫描版</title>
      <link>https://bbs.eetop.wang/thread-947405-1-1.html</link>
      <description><![CDATA[零起步轻松学数字电路(第2版)扫描版]]></description>
      <category>Aultium/Protel PCB</category>
      <author>落雪听禅</author>
      <pubDate>Sat, 15 Apr 2023 00:42:03 +0000</pubDate>
    </item>
    <item>
      <title>AD软件字符串大小被限制在254mm</title>
      <link>https://bbs.eetop.wang/thread-946297-1-1.html</link>
      <description><![CDATA[Altium Designer  Text Height must be &gt;0mm and 254mm]]></description>
      <category>Aultium/Protel PCB</category>
      <author>唐源</author>
      <pubDate>Tue, 28 Mar 2023 06:32:09 +0000</pubDate>
    </item>
    <item>
      <title>HFSS阵列仿真出错</title>
      <link>https://bbs.eetop.wang/thread-945264-1-1.html</link>
      <description><![CDATA[大家好，我在HFSS阵列仿真中，使用了先仿真单元，然后把单元网格导入阵列的方式来仿真阵列。

仿真单元时，我的空气盒子包着天线单元，空气盒子设置为radiation。然后在空气盒子外面，并离开空气盒子一定的距离（如0.1mm）设有4个面（均与Z轴平行），把这4个面依次定义 ...]]></description>
      <category>Aultium/Protel PCB</category>
      <author>cageyuen</author>
      <pubDate>Sat, 11 Mar 2023 12:17:07 +0000</pubDate>
    </item>
    <item>
      <title>一些AD库</title>
      <link>https://bbs.eetop.wang/thread-942057-1-1.html</link>
      <description><![CDATA[一些常用的库文件]]></description>
      <category>Aultium/Protel PCB</category>
      <author>努力学习ing</author>
      <pubDate>Tue, 10 Jan 2023 14:47:46 +0000</pubDate>
    </item>
    <item>
      <title>AD封装查询导入插件</title>
      <link>https://bbs.eetop.wang/thread-940325-1-1.html</link>
      <description><![CDATA[安装后使用方法：https://www.samacsys.com/altiumll-install/
注册时不要使用qq邮箱]]></description>
      <category>Aultium/Protel PCB</category>
      <author>Riching</author>
      <pubDate>Sat, 03 Dec 2022 08:08:37 +0000</pubDate>
    </item>
    <item>
      <title>Lattice封装图 package diagram</title>
      <link>https://bbs.eetop.wang/thread-940324-1-1.html</link>
      <description><![CDATA[Lattice封装图 package diagram]]></description>
      <category>Aultium/Protel PCB</category>
      <author>Riching</author>
      <pubDate>Sat, 03 Dec 2022 08:05:23 +0000</pubDate>
    </item>
    <item>
      <title>altium designer 实践案例</title>
      <link>https://bbs.eetop.wang/thread-937925-1-1.html</link>
      <description><![CDATA[AD实践案例]]></description>
      <category>Aultium/Protel PCB</category>
      <author>就一小白523</author>
      <pubDate>Thu, 27 Oct 2022 06:36:11 +0000</pubDate>
    </item>
  </channel>
</rss>